Home >Products> Other Lab Equipments >Radioactivity / Luminescence> UV / Xenon Lamp Photochemical Reactor
Other Lab Equipments:  Drug Tests / Pharmaceutics   Environmental Monitors   Food & Beverage   Radioactivity / Luminescence   Miscellaneous  
UV / Xenon Lamp Photochemical Reactor
UV / Xenon Lamp Photochemical Reactor
Brand:
Shanghai Bilon Instrument Co., Ltd
Model:
BL-GHX-I
Updated:
3/19/2021
  
| |
  • Product Detail

    Main Features:

    First,Lightsource and its controller

    Option A: mercury and mercury electric controller
    Provide light for the 300W or 500W medium pressure mercury lamp of the normal operation of mercury lamps in ultraviolet light generated during the operation accounted for 40% total energy issue. Mercury lamp light in the opening 5 minutes until stable, turn off the lights need to wait 5 minutes after the order to restart. When you do need to bring sunglasses with UV protection of eye and skin damage.
    Medium pressure mercury lamp of the optical parameters are as follows:
    Mercury lamp spectral distribution and relative intensity as follows:
    Table 1 Spectral distribution of medium pressure mercury lamp

    Wavelength (nm)

    250

    313

    365

    400

    510

    620

    720

    Relative intensity%

    20

    85

    100

    30

    20

    40

    80

     

    Mercury lamp light-emitting part of the quartz tube, hand direct contact with pollutants, which affect the light intensity. Quartz commonly used outside a clean cotton cloth dampened with a small amount of alcohol, cleaning inside the use lotion.
    Control panel with: the total power supply, lamp selection, lamp power supply, motors, light switches and the total time of launch and other settings, sub-time setting, lamp current meter, alarm instructions. Controller with fan heat.
    Controller size is 245mm × 170mm × 180mm, weighs about 23kg.
    Open the controller procedure is: select light lamp power → total power light starts, press start and then began a timing light.
    Close control of procedures: the total lamp power → Electrical → 5 minutes after power off the cooling water.
    Controller on the back of a power input line and fuse holder.
    Controller on the back of the main box for the cable plug with the corresponding interfaces.
    In the main cable box connected with the controller error, or lower than normal water pressure for the cooling water, the alarm lamp will light and alarm sound, instruments unable to work. 
    Option B: xenon lamp and xenon lamp electrical controller
    Provide light for the 500W or 1000W xenon lamp normal and stable operation. Controller size is 245mm × 170mm × 180mm, weight 34kg. Control panel with the exception "light select" button, other buttons with the same mercury lamp controller. Xenon lamp spectral distribution and relative intensity similar to daylight.
    Xenon lamp optical parameters are as follows:

    Table 3 Dimensions xenon lamps and optical parameters

    Power (W)

    Starting current (A)

    Operating Current(A)

    Operating Voltage(V)

    Effective arc length(MM)

    Wiring

    500

    8.3

    18±3

    50

    220±20

    Single-ended leads

    1000

    12.4

    30±3

    60

    220±20

    Single-ended leads

    Second, Quartz Glass Cold Trap
    It is not only high efficiency UV penetration, ensures the access to light and reactive substances, but also keep the experiment  away from external influence .

    Third, Dark Box

    The main box is a series of photochemical reaction apparatus placed where light devices, has the following characteristics:
    Box of size 480mm × 420mm × 900mm, weighs about 29kg.
    Inside the black box in order to reduce light reflection.
    After the upper cabinets with cooling fan board, cabinets after the central board has "flow switch", can be realized off (cooling water) water alarm. After the bottom plate has two holes for the cooling water pipes, pipe and cable to connect the controller through.
    Cabinets on the left there are three special socket for the box of the motor, lights and the "flow switch" to use the output plug.

    Forth, Glass Vessels

    Glass reaction vessels could be separately chose 250 ml, 500 ml, 1000 ml, etc. (or customized).

    Fifth, Magnetic Stirrer

    Use of solar collector heating method, by heating the container completely in strong heat radiation into the heating speed is three times the surface heating magnetic stirrer. Temperature uniformity, high efficiency, more responsive ball heated reaction flask.
    Excellent selection of main components of this machine, electric motors use DC power, stirring torque  noise. Special stainless steel heating tube aging at 800 °C in 24 hours. Insulation resistance> 1000MΩ, safe and reliable when dry. Use the strongest magnet magnetic current, "Nd-Fe-spring" to do the rotor magnet, to ensure adequate sharp and torque.
    reasonable structure, with large flat heating aluminum heating, rapid heating can be placed on any vessel, can be water (water bath)  fuel (oil bath)  and dry, but also where the main advantages of this machine, heating and electrical box for some isolation between the plate by heat, stirring at high heat does not affect the electrical performance machine.

    Situated in the industrial zone, Minhang district, Shanghai, China. We are engaged in the production and sals of laboratory instruments. Our major products include:

    Cooling and Heating Devices
    Photochemical Apparatus
    Ice Makers
    Ultrasonic Instruments
    Laboratory Spray Dryer
    Vacuum Freeze Dryer
    Extracting Devices
    Animal Experimental Instruments

    We also sell other laboratory instruments as an agent. In addition to product sales, we will focus on a comprehensive service to users, including detailed product advisory services, comprehensive technical support and good after-sales service.
    Now After 6-year developing, we has gained increasing domestic market share and enjoyed good reputation in the industry, our products are applied to many universities and scientific research facilities in many fields.

    Contact Information
    Attn: Ms. Wendy Li
    Oversea sales manager
    E-mail:wendyli1004gmail.com
Request Infomation
Request Infomation: yes no
Request Quotation: yes no
refresh

I agree to share my inquiry with the other matching suppliers.

Request Infomation

* Name:
Job Title:
* Tel:
Fax:
* E-mail:
Postcode:
Institution/Company:
Address:
* Country:
Request Infomation:
yes no
Request Quotation:
yes no
* Message:
* Verification Code:
refresh
I agree to share my inquiry to the other matching suppliers.