Narishige PP-830 电j拉制仪，用PP-830电j拉制仪（Narishige,pan）
微电j拉制仪 PP-830 日本Narishige,Narishige PP-830 电j拉制仪，用PP-830电j拉制仪(Narishige,pan)
PP-830
DISCONTINUED Please See PC-10
PP-830: Single Stage Glass Microelectrode Puller
This model has been discontinued and replaced by the similar, but more full-featured PC-10.
Vertical Pull Type for producing microelectrodes and performing double mode pulling.
The method used by this puller is to pull the glass capillary vertically, using the gravitational force of its own weight. For more versatility, two modes are provided: a single pull, which pulls at one stretch, and a double pull in which the setting is changed in mid-process. The PP-830 can therefore produce firm microelectrodes for patch clamping (its main purpose) as well as long, thin microelectrodes for intracytoplasmic sperm injection. To save on cost, production in the double mode is by the conventional method of moving the heater manually and arresting the first step by means of the stopper. Digital values, with the maximum output of the electromagnet and heater represented as 100, are shown on the display and the heater output is continually increased, making accurate mass production easier. This puller has several simple features to enhance ease of use, such as the employment of two weights (light and heavy) for tension adjustment.
Specification | Accessories included | GD-1 Glass Capillary with filament, Spare Heater,
Power Supply Cable | | Power source | AC100V(+-5%), AC120V(+-5%),
AC220V(+-5%), AC240V(+-5%) | | Power cosumption | Approx. 80W | | Heater level | 100 = heater voltage 2.5V | | Weight | Approx. 25g x 2, Approx. 100g x 2 | | Dimensions/Weight | W205 x D190 x H185mm, 6.0kg |
Consumable
| Model | Product | Description | | PC-10H | Heater | Kanthal wire (x5) |
PC-10 Dual-Stage Glass Micropipette PullerPC-10: 
Narishige's PC-10 micropipette puller is a dual-stage micropipette processing system which provides reliable and consistent production of micropipettes with tip sizes ranging from one micron to tenths of a micron.
The PC-10 incorporates several key features that make it an ideal choice for producing microinjection needles and pipettes for patch clamp experiments. The built-in power source is specially stabilized to deliver a uniform amount of current to the heating coil each time. The stabilized delivery of power ensures consistent and even heating of micropipettes time after time.
Heater levels for both single and double pull operations can be adjusted, and the heater level is shown by a highly-visible digital LED readout display.
During the pulling process, micropipettes are shielded from air currents by the use of an acrylic shroud. This excludes external drafts that might otherwise affect the shape and size of the micropipette.
Two pairs of weights (two light and two heavy) are provided for adjustment of the pulling force. Also included are a spare heater coil (PC-10H), and a sample of 1.0mm I.D. glass microcapillary tube with internal glass fiber (GD-1).
Narishige is using this more automatic and full-featured PC-10 to replace the old semi-automatic PP-830 that was discontinued in 2006. The PC-10 is also the replacement for the even older model PB-7 and it serves as a lower-cost more robust alternative to Sutter's P-30. In fact, we use the PC-10, here at Tritech Research, to pull our pre-pulled microcapillary needles (see MINJ-PP) that we sell for C. elegans, Drosophila, Xenopus, Zebrafish, and transgenic mouse work.
Specification
| Accessories included | GD-1 Glass Capillary with filament, Spare Heater,
Power Supply Cable | | Power source | AC100V(+-5%), AC120V(+-5%),
AC220V(+-5%), AC240V(+-5%) | | Power consumption | Approx. 80W | | Heater level | 100 = heater voltage 2.5V | | Weight | Approx. 25g x 2, Approx 100g x 2 | | Dimensions/Weight | W205 x D190 x H185mm, 6.0kg |
Consumable | Model | Product | Description | | PC-10H | Heater | Kanthal wire (x5) |
|
