MOM+CO2-5001,模块式氧气监测仪,Modular Oxygen Monitor + CO2 (MOM+CO2),低氧培养氧气二氧化碳监测器,氧气二氧化碳多功能监测器

型号:MOM+CO2-5001
联系人:李胜亮
联系电话:18618101725（微信同）
品牌:tissue control/, in

Modular Oxygen Monitor + CO2 (MOM+CO2)

The Modular Oxygen Monitor + CO2 (MOM+CO2) sensor is an environmental monitoring device, designed to be placed inside the Modular Incubator Chamber (MIC-101) as well as conventional cell culture incubators. It features an OLED display as well as onboard data logging and remote wireless access of its integrated gas (O2 & CO2), temperature, humidity and pressure sensors.

MOM+CO2 is designed to operate in the harsh high-humidity environment of tissue culture incubators. It features revolutionary solid-state sensors for gas monitoring, eliminating the constant maintenance and re-calibration required by conventional electrochemical and galvanic sensors (for oxygen monitoring) and incandescent IR sensors (for carbon dioxide). The MOM+CO2 is factory calibrated with NIST certified gases for temperature, pressure and humidity and will not need re-calibration under normal conditions.

It has flexible operating modes, ranging from a rapid data acquisition mode for real-time gas mixing to a low-power mode, waking up on a configurable schedule, allowing for long term data acquisition.

MOM+CO2 uses industry standard 802.11 WiFi wireless technology for remote monitoring. Multiple units can pair with a separate Data Aggregator Module which allows remote data logging and instant network access to live as well as logged data via a web browser or by API. In labs without wireless networking, it can be configured as a direct Access Point, allowing laptops and mobile devices to connect directly to it. An API is available upon request for custom applications.

Its safe LiFePO4 battery technology, developed by the University of Texas, can support from >24 hours in continuous rapid data acquisition mode to over a week at normal data logging rates.

Sensors
Oxygen (O2) Sensor

Technology: Solid-state Fluorescence Quenching, Diffusion Sampling

Range: 0% to 25%

Accuracy tolerance: < 2% FS

Resolution: 0.01%

Operating Conditions: -30°C to 60°C, 500-1200mbar

Carbon Dioxide (CO2) Sensor

Technology: Solid-state NDIR 4.2um-4.4um absorption, Diffusion sampling

Range: 0% to 20%

Accuracy tolerance: ±(70ppm +5% of reading) @STP

Operating Conditions: 0°C to 50°C standard (-25C to 55C extended), 500mbar to 10 bar

Barometric Pressure Sensor

Range: 500-1200mbar

Accuracy tolerance: 5mbar

Resolution: 1mbar

Temperature Sensor

Range: -40°C to 125°C

Accuracy tolerance: ±0.2°C (0°C to 90°C)

Resolution: 0.01°C

Long-term Drift (max): <0.03°C/year

Humidity Sensor

Range: 0%RH to 100%RH

Accuracy tolerance: ±2%RH

Resolution: 0.01%RH

Hysteresis: ±0.8%RH (@25°C)

Long-term Drift (typical) : <0.25%RH/year

Benefits

Reliable and accurate performance in harsh environments.

Long lifetime – low maintenance.

Solid state sensors – no moving parts, non-depleting technology, no heated filaments

Virtually no gas cross-sensitivity. Works where other sensor technologies don’t.

Vibration and shock resistant.

Compensated for temperature, humidity and pressure.

Wireless tested to work in water-jacketed incubators.

Features

Small footprint – fits in compact enclosures

Factory calibrated & Maintenance free – no re-calibration required in normal operation.

Safe rechargeable battery technology (LiFePO4), unit comes with charger.

Designed and Manufactured in the United States

配套的低氧培养系统

代理，mic101,mic-101细胞气体成分控制培养系统
细胞缺氧培养,brincubator,Modular Incubator Chamber

型号:mic101,mic-101

价格:请致电：010-67529703

品牌:

产品描述

应用于体外受精、艾滋病毒的分离、建立低氧、高氧和正常含氧量的环境条件，器官培养和大量细胞株的培养。每一个单元都是一个du立的培养室，可以建立所需的培养室拥有良好的气密性和快速的气体交换特性，快速经济的形成一个稳定组织培养环境（包括气体浓度和湿度）。

MIC-101培养室

? 三层支架，空闲充裕

?主体材质是透明的聚碳酸酯，有非常高的透视性和耐久性
? 培养室可以堆叠摆放、内扣连接后振荡培养，作为储存室节省空间
? 内置多用途托盘，方便放置培养皿、试管、组织培养瓶、微量板等
? 方便简单的盖子和 Marman 夹设计，使实验操作便捷
? all组件都wu毒，可酒精消毒
? 培养室内部夹角wu缝隙连接便于清洗和去污
? 圆柱腔的几何形状提供了极好的气体分布
?O 型圈有着完美的气密性密封

尺寸
外径：直径 31cm 高 11cm
内径：26.7cm
板间间隙：2.3cm
容量
84 个 35mm 培养皿
27 个 60mm 培养皿
12 个 100mm 培养皿
9 个 96 孔培养板
18 个 25cm2 组织培养瓶

流量计

流量计包括单流量计和双流量计 2 种，能帮用户确定知道何时获得 100％气体交换，流量可在 3~25L/min（或 0.1~10LPM）之间任意调节。

单流量计被用来控制预混合气体的流率；

双流量计除了控制气体流率还可以用来混合气体（双流量计被用作检测与氧气检测器组合使用）。

每个培养室的体积大约为 8L。
? 单流量计用于控制预混合气体的流速时为每分钟 1.0~25L （或 0.1~10LPM

双流量计通常用于需要对 O2 和 CO2 的浓度进行调整以确定气体混合后效果的实验。此系统有两个流量计，一个为 0.1~1.0LPM，另一个为 0.1~10LPM, 有两个不同的管口，允许气体从两个不同的气瓶输入。当流量计为 0.1-1.0LPM 流量计的进气口被关闭时，双流量计可以以相同的方式作为单个流量计可用于预混合气体。

使用本设备发表的高水平文章

te色:

1)密封性好，氮气消耗量低，正能做到低氧;

2)经济简便

3)缺氧\高氧模块化孵化室涉及为类似坩埚的装置,上密封室下密封室(连接有进出气管道)、聚碳酸酯材质的隔层架、不锈钢密封扣件。

4)使用方便，经济耐用，节省空间

5)内置多用途托盘，方便放置培养皿、试管、组织培养瓶、微量板等

6)all组件都wu毒，可酒精消毒。 6)圆柱腔的几何形状提供了极好的气体分布。

7)可靠的气密性密封，能100%控制气体含量和交换,0.1%浓度控制；

8)可以放置在二氧化碳培养箱内，与其他条件的形成严格对照

9)应用范围：安quan、可靠的缺氧、常氧、高氧模块化孵化室广泛应用在体外受精、艾滋病毒隔离、建立缺氧、高氧、常氧环境条件器官培养的细胞株培养。